Atmospheric plasma SX-80 FM

Atmospheric plasma SX-80 FM

（float flowmeter ）（ Provide two spray guns） Plasma spraying of all ceramic coatings

 SG-100 and Single-sided sprayable inner hole ≥ 50mm, length ≤ 850mm hole

1. SG-100 Advanced spray gun

We can offer customer SG100 spray gun, using argon or nitrogen as main gas, hydrogen as secondary gas. The working current of spray gun: 100-800A. The working voltage: Ar+H2: 50-75V, N2+H2: 50-80V. We provide the following spray gun accessories for  our customer: spray nozzle, powder and cooling air jetting shelf, water-cooled cable, electrode tip, insulator, sealing ring, and other special tools.

Parameter of SG100 spray gun

2.Inner hole spray gun

Single-sided sprayable inner hole ≥ 50mm, length ≤ 850mm hole

Maximum operating parameters: 700A, 50V, approximately 35KW. Accessories: 3 powder feeding nozzles, 3 anode heads each, 1 ceramic ring, 1 water and gas separator, a set of gun disassembly tools, a small bottle of Vaseline, 4 sealing rings.

3.PLC Smart touch screen operating system and Gas Safety Center

The intelligent control system is the control center of

the whole set of equipmentFeatures of SX-80 human machine

interface intelligent control system SX-80 human machine

interface intelligent control system, The plasma spraying

system has the advanced level of foreign similar products,superior performance and convenient operation. The

control cabinet adopts PLC touch type control terminal,

which integrates operation, setting, help, display,

process and fault alarm monitoring. It simplifies the

panel design, is convenient to use, and is more simple and intuitive to operate.

gas safety center

(special note: because H2 gas is a flammable and explosive dangerous gas, and mass flowmeter is an electrical component, there is a risk of combustion and explosion when electric spark is generated. Therefore, the independent "water, electricity and safety center" specially manufactured and developed by our company provides safety guarantee function for the use of equipment.)

Functional features:

A. Three kinds of gas (H2, N2, ar2) leakage detection

system.

B. Gas leakage alarm device.

C. Cut off the air inlet pipe quickly.

D. Flashback prevention and flameout device of spray gun.

E. Leakage protection, cut-off and alarm device.

F. Current overcurrent protection device.

G. Overvoltage protection device.

H. Water leakage pressure sensing device.

1. Super high water temperature warning, shutdown system.

J. Dust concentration monitoring alarm and shutdown devi

4. Parameter of SX-80 transfer box

The transfer box is the transfer center of this plasma spraying equipment. It links power supply, control cabinet, heat exchanger and spray gun together. There are high frequency ignition , waterway and gas circuit alarming devices inside this box. The transfer box is moveable, with standard 5 meter long water-cooled cable.It mixes the water and electricity and sends them to the spray gun,meanwhile it offers high frequency impulse voltage which is needed when the spray gun forms the arc,and tests spay gun’s returned water’s temperature and cooled water’s pressure.It’s easy and flexible,easy to draw,is good at forming arc ,and can reduces the moment currency’s  impact when the nozzle is forming arc.

Parameter of SX-80 transfer box

5. intelligent powder feeder

1.PLC and touch screen are used to set parameters to precisely control powder feeding accuracy and speed.

2、The system consists of two sets of independent powder feeding devices. The capacity of the large tank is 3 liters, and the speed of the scraper-type powder feeding is 150 g/min. The small tank adopts the drum-type powder feeding device, which is suitable for feeding various ultra-fine powder and hard-to-deliver powder mixtures.

3、Fully enclosed plastic-steel chassis, free from environmental disturbance such as temperature and humidity, transparent glass door, powder feeding state at a glance.

Powder vibration device, powder tank heating device and weighing device can be selected

4.  water chiller

Heat exchanger is also called refrigerator or water chiller. We use double motors compressor to make this machine smaller and save space for our customer. The spray gun is cooled down by water, and we use heat exchanger to cool down the high temperature water coming from spray gun, and then use these cooled water  to cool down the spray gun again. In this way the spray gun can keep a normal working temperature and prolong the usage life of spray nozzle.

Function characteristic

The range of testing temperature is -4.9℃-94.9℃,dispraying resolution ratio is 0.1℃,controling sensitivity is 0.1℃,offset range is -0.5℃—10℃,used in AC220V input.the instrument use condition:relative humidity less than 90%RH,the temperature is within 0—45℃ with no  corrosion and water-proof.

Parameters of cooling system

SX-80 plasma spray equipment parts procurement: