Atmospheric plasma SX-90 MFC

Atmospheric plasma SX-90 MFC

（Mass flowmeter)  (with two spray guns)Plasma spraying of all ceramic coatings

SG-100 plasma spray gun  with F4 plasma spray gun

Atmospheric plasma SX-90 MFC

（Mass flowmeter)  (with two spray guns)Plasma spraying of all ceramic coatings

 MFC SX-90  One-click automatic startup

MFC SX-90 Operation points:

After the equipment is installed: click the screen to open the setting of digital parameters, you can start the machine.

------------------------------------------------------

FM SX-80 compared to MFC SX-90: Operating equipment:

1. MFC SX-90 only needs to input data on the touch screen to start up. Relatively stable. So many people choose to use it

2.FM SX-80 needs to use manual control panel data meter { main gas meter, ammeter, voltmeter, powder supply pressure gauge } program is a little more complicated than.

----------------------------------------------------------------------------------------------------

MFC SX-90: Operating equipment:

1-You must click the purification button every time before starting the machine: (count the second button from the left)

(In order to purify the impurities of the spray gun, press and hold the purify button for 4-5 seconds, then release your hand. Complete)

2--Then press the Start button:  (yellow button)

(Press the start button for 2 seconds ----- release the hand. Complete)

3---- then see sG-100 spray gun on arc light:

(After the arc light of the spray gun reaches the standard ----- can be sprayed with powder to start)

4-- Reference table of powder spraying data of various components:

5---- After the end of the shutdown is the red button.

(------- completed ------)

When there are other parts that are not ready such as: gas, plumbing system, powder, etc., the equipment will automatically alarm, and show which parts of the equipment need repair

SX-100 Remote Control system Plasma equipment

(Upgraded SX-90 proton flowmeter + remote control system)

Settings:

1. Remote control data PLC computer operating system

2.SX-90/100 proton flow meter safety control cabinet

3. Workshop production personnel use PLC man-machine interface menu operating system

4. Including: SG-100 advanced spray gun, powder feeder, transfer box, cooling system

 Remote operation Features:

Programmed : Main interface, formula interface, history interface

1. Remote operation, suitable boss level and management can see the situation on the site, command the operation parameters (computer remote main interface)

2. Used to check the coating formula of control parameters, so that it does not waste any resources, powder, fuel, power supply, and timely adjustment if there is a problem (computer remote main interface)

3. The main formula interface can store 1000 formula spray layers, when used for different workpieces, different parameters of the formula have a reliable record (formula interface)

4. The interface of formula case can be searched and called: record the spraying layer by time and the workpiece by the name of the workpiece, click to use directly, to ensure the consistent factory standard of the sample (history interface)

SX-100 Remote control (SX-90 upgrade) Plasma spraying equipment system

Settings:             

Technical introduction of SX-100 Mass Flow Meter Plasma Equipment:

1. The operating system composed of Siemens PLC and Siemens touch screen can store more than 1000 spraying formulations and achieve diversified control of more than 1000 spraying process parameters. Moreover, the data input and output can be realized by connecting with the external central control host through the port, and the monitoring, recording and printing functions with the external computer can be realized.

2, through the mass flow meter to achieve digital accurate flow control of all process gases used in spraying, including powder carrier gas. The mass flow meter ensures that the flow accuracy of the gas is controlled within the ±1.0% range, thus ensuring the repeatability of the coating.

3, the gas flow is adjusted through the touch screen human-machine interface, each process gas is displayed on the touch screen and the actual value of the flow and pressure is displayed in real time during the spraying process. Each gas pipeline has its own independent mass flow meter and pressure sensor to achieve accurate control, monitoring and display of gas.

We can offer customer SG100 spray gun, using argon or nitrogen as main gas, hydrogen as secondary gas. The working current of spray gun: 100-800A. The working voltage: Ar+H2: 50-75V, N2+H2: 50-80V. We provide the following spray gun accessories for  our customer: spray nozzle, powder and cooling air jetting shelf, water-cooled cable, electrode tip, insulator, sealing ring, and other special tools.

Parameter of SG100 spray gun

F4 plasma accelerator (for external spraying), effective power 55 kW;

Anode and cathode alignment device in plasma accelerator F4.

With this multi-purpose thermal spray gun you apply coatings on a wide range of external surfaces. It enables you to deposit coatings of metal alloys, carbides, composites, blends, cermets, abradables and oxide ceramics.

Key characteristics

High powder feed rate reduces production time

Versatile, supporting a broad range of applications

Sprays many material types with a single nozzle / electrod

SX- 90 plasma spray equipment parts procurement:

          Thermal spraying thermal barrier coating     

       Insulation 2000 - 6000 volts