Filter Dust Collector

casa >> productos >> equipo de pulverización habitación >> Filter Dust Collector
Filter Dust Collector
Filter Dust Collector
Model: WDT
descripción
contacto proveedor

Back pulse filter type dust collector

Scope of application
WDT type filter dust collector is after many years of experience in design and use, and combined with foreign advanced filtration technology, production of a highly efficient energy-saving dust purification equipment. Widely used in mechanical processing, chemical production, powder recovery, building manufacturing, and medicine production, food production, furniture production company and hardware electronic processing industries such as dust removal.
Characteristics of the equipment
1, cover an area of an area small, save use space;
2, high purification efficiency for submicron dust of more than 99. The purification efficiency of more than 9%;
3, USES the import filter material, has a long service life;
4, equipment simple structure, convenient maintenance, low cost;
5, equipment operation and low resistance effective dust removal system saving energy;
6, clear ash adopts automatic control mode, can save compressed air consumption.

 

Working principle of the
In normal operation, the dust gas by the top entry into the dust, and through the filter. Dust in the process was set in the external surface of the filter, clean air through the filter into the clean air chamber center, through the outlet. Filter dust, the control timer will automatically choose one or more filter for dust, at this point, the controller will open the electromagnetic pulse valve, high pressure air directly into the selected filter center, blow the set on the surface of the filter, dust sweep clean. Dust with the main flow direction, and under the action of gravity drop into the dust hopper.


WDT filter dust collector parameter table
 

Parameter models air volume m3/h Filtration rate m/min Filter area m2 Compressed air volume m3/min Equipment resistance Filter rows Installation dimensions mm Amount of weight kg
WDT-2-8 8000 <1.2 160 0.2 800Pa 2 1000×1900×3000 700
Allow the temperature <70℃
Entrance dust concentration <3g/m3
Dust removal efficiency 99.90%
Soot cleaning way Compressed air back pulse
Compressed air requirements Pressure required to around 0.5 to 0.6 MPa
Import way Top imported or top sides
Accept grey way Grey car or discharging valve
 

* sujeto
* mensaje
* nombre
companyname
dirección
* email
* tal
productos similares